Cobalt and nitrogen atoms co-doped porous carbon for advanced electrical double-layer capacitors

Electrical double-laye r capacitors are widely concerned fo r their high power density,long cycling life and high cycling efficiency.However,their wide application is limited by their low energy density.In this study,we propose a simple yet environmental friendly method to synthesize cobalt and nitrogen atoms co-doped porous carbon(CoAT-NC) material.Cobalt atoms connected with primarily pyridinic nitrogen atoms can be uniformly dispersed in the amorphous carbon matrix,which is benefit for improving electrical conductivity and density of states of the carbon material.Therefore,an enhanced perfo rmance is expected when CoAT-NC is served as electrode in a supercapacitor device.CoAT-NC displays a good gravimetric capacitance of 160 F/g at 0.5 A/g combing with outstanding capacitance retention of 90% at an extremely high current density of 100 A/g in acid electrolyte.Furthermore,a good energy density of30 Wh/kg can be obtained in the organic electrolyte.     

衰减全反射傅里叶变换红外光谱法同时测定叔丁醇和二叔丁基过氧化物

分别应用914 cm-1和875 cm-1处的甲基特征峰作为叔丁醇和二叔丁基过氧化物的定量分析峰,使用峰面积作为吸光度的评估方法,得到的标准曲线的相关系数(R2)分别是0.9987和0.9952,叔丁醇的加标回收率在95％～110％之间,应用衰减全反射傅里叶变换红外光谱法测定3个样品,计算结果的F值、t值和p值,数据表明衰减全反射傅里叶变换红外光谱法与气相色谱法的测定结果一致.     

双功能改性的T型分子筛膜用于有机溶剂脱水

将3-氨丙基三乙氧基硅烷（APTES）引入到T型分子筛膜表面,用以修饰多晶膜合成过程中产生的缺陷。X射线衍射、场发射扫描电子显微镜、X射线光电子能谱和FT-IR等方法的表征结果显示,APTES通过“键合”的形式被成功地修饰到膜表面上。APTES层起到2个作用：一是提高膜的亲水性;二是减少膜层的缺陷。将修饰后的膜应用在348 K、90%的异丙醇水溶液的脱水时,该膜表现出比较高的分离因子和通量。该方法重复性良好,5个修饰后的膜样品的选择性平均增加了大约8倍（从359±23增加到2 934±183）,而渗透通量仅仅从（3.52±0.10） kg·m^-2·h^-1降低到（3.06±0.14） kg·m^-2·h^-1（减少13.07%）。在363 K下,修饰的膜经过100 h的连续测试,膜渗透测得的水含量均可达到99.50%以上,表明修饰后的膜性能较稳定。     

Self-assembled lamellar nanochannels in polyoxometalate-polymer nanocomposites for proton conduction

The construction of nanostructured ion-transport channels is highly desirable in the design of advanced electrolyte materials,as it can enhance ion conductivity by offering short ion-transport pathways.In this work,we present a supramolecular strategy to fabricate a nanocomposite electrolyte containing highly ordered lamellar proton-conducting nanochannels,by the electrostatic self-assembly of a polyoxometalate H_3 PW_(12)O_(4 O)(PW) and a comb copolymer poly(4-methlstyrene)-graft-poly(N-vinyl pyrrolidone).PW can effectively regulate the self-assembling order of polymer moieties to form a large-ra nge lamellar structure,meanwhile,introducing protons into the nanoscale lamellar domains to build proton transport channels.Moreover,the rigid PW clusters contribute a remarkable mechanical reinforcement to the nanocomposites.The lamellar nanocomposite exhibits a conductivity of 4.3 × 10~(-4) S/cm and a storage modulus of 1.1 × 10~7 Pa at room temperature.This study provides a new strategy to construct nanostructured ion-conductive pathways in electrolyte materials.     

Booting the electrochemical properties of Fe-based anode by the formation multiphasic nanocomposite for lithium-ion batteries

Fe-based compounds with good environmental friendliness and high reversible capacity have attracted considerable attention as anode for lithium-ion batteries.But,similar to other transition metal oxides(TMOs),it is also affected by large volume changes and inferior kinetics during redox reactions,resulting in the destruction of the crystal structure and poor electrochemical performance.Here,Fe_3O_4/C nanospheres anchored on the two-dimensional graphene oxide as precursors are phosphated and sintered to build the multiphasic nanocomposite.XRD results confirmed the multiphasic nanocomposite composed of Fe_2O_3,Fe_3O_4 and Fe_3PO_7,which will facilitate the Li~+ diffusion.And the carbonaceous matrix will buffer the volume changes and enhance electron conduction.Consequently,the multiphasic Febased anode delivers a large specific capacity of 1086 mAh/g with a high initial Coulombic efficiency of 87% at 0.1 C.It also has excellent cycling stability and rate property,maintaining a capacity retention of～87% after 300 cycles and a high reversible capacity of 632 mAh/g at 10 C.The proposed multiphasic structure offers a new insight into improving the electrochemical properties of TMO-based anodes for advanced alkali-ion batteries.     

掺氧化钙及相变对高压下立方氧化锆电子结构和光吸收的影响

研究表明,立方氧化锆可作为冲击波实验中的窗口材料.为了使得该材料在常态下保持结构稳定,需添加稳定剂——氧化钙.然而,掺杂会导致其在29 GPa的冲击压力下从立方转变为斜方Ⅱ结构相.因此,该材料在冲击压缩下的电子结构和光学吸收性质以及作为光学窗口的适用压力范围是值得研究的重要问题.本文运用第一性原理的方法,分别计算了在100 GPa范围内两种结构氧化锆的电子结构和光学吸收性质.结果表明:(1)在立方结构相区,冲击压力将导致其吸收边蓝移,而在斜方Ⅱ结构相区,却使得其吸收边红移;(2)在立方结构相区,掺杂将引起能隙变窄(吸收边红移),但对于斜方II相区,却导致能隙变宽(吸收边蓝移);(3)冲击结构相变使得能隙变窄,吸收边红移.本文数据建议,掺氧化钙的立方氧化锆在95GPa的冲击压力范围内可作为光学窗口材料.